DELTA®-FASSADE PLUS 20 / DELTA®-FASSADE 20

Façade membrane for wide variations of building constructions. Watertight. Extremely tear-resistant.

DELTA®-FASSADE PLUS/ DELTA®-FASSADE acts as a reliable, breathable insulation protection sheet for use on façade constructions with open joints up to 20 mm in width that make up a maximum of 20% of the surface area. DELTA®-FASSADE PLUS boasts an integrated self-adhesive edge. Also available as DELTA®-FASSADE without a self-adhesive edge.

Intelligent DELTA® technologies for a UV-stable, durable and energetic facade

All DELTA ® -FACADE formwork and underlays are based on intelligent technologies. They are the result of years of experience, continuous development and the highest quality standards. It is our aim to offer the best possible solution for the respective requirement. In the field of façade construction in particular, the requirements today are extremely complex. Intelligent answers are required.

Active-Membrane–System

The intelligent DELTA® membrane technology protects the buildings like a skin.
This membrane technology ensures that the entire of construction remains permanently dry. It protects the construction like a second skin.

DELTA®-BiCo Technology

The cloth layers for our DELTA® sarking sheets are made with the latest BiCo core-mantle technology. Cloth backings ensure the mechanical stability – or tear strength – of all sheets.

DELTA®- FASSADE PLUS 20 / DELTA®-FASSADE 20

Overview of the most important advantages

Unique membrane technology

Waterproof

Windproof

Breathable

UV protection

Long-term protection against aging

Robust

DELTA®- Bico technology

Secure against driving rain

Made in Germany

Application DELTA®- FASSADE PLUS 20 / DELTA®-FASSADE 20

Ventilated cladding.

Use as a rain screen behind ventilated cladding with open (or closed) joints in contact with the insulation.
The openwork cladding must not have joints greater than 20 mm and their proportion must not exceed 20% of the total surface.
Gluing of overlaps and side fittings is recommended, in particular for applications behind openwork facades (DELTA®-TAPE FAS).
The longitudinal overlaps are glued using the integrated self-adhesive strips (PLUS version).

Technical data:

FASSADE PLUS 20 / DELTA®-FASSADE 20

Material	Specially coated, highly tear-resistant polyester fleece with a waterproof plastic coating and adhesive zones on both edges. DELTA®-FASSADE 20 without adhesive zones.
Application	DELTA®-FASSADE 20 PLUS for open facades with up to 20 mm wide joints and a maximum joint proportion of 20% of the surface.
ZVDH	Class UDB-A / USB-A (highest class)
Fire resistance	B-s1, d0 according to EN 13501-2
Tear strength	approx. 270/230 N / 5 cm, EN 12311-,
Water tightness	Class W 1, EN 13859-1 + 2 before and after aging
Sd value	approx. 0,02 m, EN ISO 12572
Diffusion resistance	approx. 0.028 m² hPa/mg
Service Temperature range	-40 °C to +80 °C
Short-term maximum temperature load of the material	+150 °C
Resistance against driving rain	Pass in the driving-rain test for waterproofing and soft sheathing, TU Berlin
Increased requirement for aging	Passed, ZVDH product data sheet table 1
Weight	approx. 210 g/m²
Roll weight	approx. 16 kg
Roll size	50 m x 1,50 m