DELTA®-MULTI-BAND
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
DELTA®-EASYFIXX: Spray Contact Adhesive
A transparent, solvent-based, chloride-free contact adhesive. Water resistant with fast initial grab, it is a universal fixing and assembly aid for many surfaces.
Supplied in Ireland by Commons House Design, the official Dörken DELTA® partner in Ireland, with a showroom in Athy, Co Kildare.
- Fit from
- from +10 °C
- Pack
- 500 ml
Interested in DELTA®-EASYFIXX?
Ask us about the right build-up, quantities, availability and delivery for your project.
Advantages
- Quick and easy to use
Applied straight from the spray can, with no extra accessories or tools.
Where to Use
Bonds insulation such as EPS, XPS, PIR and PUR, soft wood fibre and OSB boards, porous surfaces such as masonry, plaster and concrete, plus wood and metal. The surface must be clean, dry and free of dust, frost and grease. Work at +10 °C to +30 °C ambient and component temperature (temperature-controlled storage recommended).
Spray evenly from about 15-20 cm, coverage up to 9 m² per litre depending on the surface. Apply to one or both surfaces; both sides gives the best adhesion. Full adhesive strength after 24 hours.
Product Data
- Service temperature range
- < 80 °C
- Application temperature
- from +10 °C to approx. +30 °C
- Setting time
- Full adhesive strength after approx. 24 hours
- Coverage
- up to 9 m²/l depending on the substrate
- Contents
- 500 ml
Values are typical. Check the current Dörken data sheet before specifying.
Related Products
DELTA®-FLEXX-BAND FG 80/150
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
DELTA®-FLEXX-BAND F100
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
DELTA®-TIXX
Accessory for making joints, overlaps and connections of airtight layers permanently airtight.
Frequently Asked Questions
What is DELTA®-EASYFIXX used for?
Bonds insulation such as EPS, XPS, PIR and PUR, soft wood fibre and OSB boards, porous surfaces such as masonry, plaster and concrete, plus wood and metal. The surface must be clean, dry and free of dust, frost and grease.
Can I use DELTA®-EASYFIXX in cold weather?
Application temperature: from +10 °C to approx. +30 °C. Check the conditions on site before you start, especially in Irish winters.
Where can I find the DELTA®-EASYFIXX data sheet?
You can download the available documents in the Downloads section of this page.
Do you supply DELTA®-EASYFIXX in Ireland?
Yes. Commons House Design is the official Dörken DELTA® partner in Ireland. Contact us for availability, quantities and delivery, or visit our showroom in Athy, Co Kildare.
