DELTA®-ECO ROLL: Ridge and Hip Roll
A cost-efficient ridge and hip roll for connecting roof coverings such as clay and concrete roof tiles. Its fleece centre section provides ventilation in the hip and ridge areas.
Supplied in Ireland by Commons House Design, the official Dörken DELTA® partner in Ireland, with a showroom in Athy, Co Kildare.
- Fit from
- from +5 °C
- Widths
- 240 mm, 310 mm, 380 mm
- Roll length
- 5 m
- Pack
- 4 rolls
Interested in DELTA®-ECO ROLL?
Ask us about the right build-up, quantities, availability and delivery for your project.
Advantages
- Composite construction
An aluminium edge area combined with a multi-layer polyester fleece centre gives durable hip and ridge closures.
- Expansion reserve
Pronounced pleating in the edge area gives roughly 30% extra material, so the roll can be shaped to the profile of the covering.
- Tear-resistant underside
The film-coated aluminium underside resists tearing, for safe and quick installation.
- Three widths
Available in 240 mm, 310 mm and 380 mm to suit different covering profiles.
Where to Use
Unroll the product and staple it to the hip or ridge batten, aligning it using the product name printed on the centre section. Remove the release strip, shape the edge areas and press the adhesive strip down. Then fix the ridge or hip tile according to the manufacturer's instructions.
The substrate must be sound, dry and free of dust.
Product Data
- Material
- Film-coated, highly tear-resistant aluminium on the underside. Multi-layer polyester fleece in the central area. Butyl adhesive strips on both edges.
- Service temperature range
- from -30 °C to +80 °C
- Application temperature
- from +5 °C to +40 °C
- Stretchability margin
- by pleating approx. 30%
- Substrate condition
- Load-bearing, dry, free of grease, frost and dust
- Roll width
- 240 mm, 310 mm, 380 mm
- Roll length
- 5 m
- Packaging
- 4 rolls
- Colours
- black, red, brown
Values are typical. Check the current Dörken data sheet before specifying.
Frequently Asked Questions
What is DELTA®-ECO ROLL used for?
Unroll the product and staple it to the hip or ridge batten, aligning it using the product name printed on the centre section. Remove the release strip, shape the edge areas and press the adhesive strip down.
What sizes does DELTA®-ECO ROLL come in?
Roll width: 240 mm, 310 mm, 380 mm. Roll length: 5 m.
Can I use DELTA®-ECO ROLL in cold weather?
Application temperature: from +5 °C to +40 °C. Check the conditions on site before you start, especially in Irish winters.
Where can I find the DELTA®-ECO ROLL data sheet?
You can download the available documents in the Downloads section of this page.
Do you supply DELTA®-ECO ROLL in Ireland?
Yes. Commons House Design is the official Dörken DELTA® partner in Ireland. Contact us for availability, quantities and delivery, or visit our showroom in Athy, Co Kildare.
