DELTA®-TRELA (PLUS)
Structured separation layer for metal roofs and façades such as zinc, copper and steel.
DELTA®-ENKA VENT: Structural Mat for Metal Roofs
DELTA®-ENKA VENT is a structured separation layer for metal roofs and façades such as zinc, copper and steel. It creates a ventilated, draining space under the metal, so condensation can dry out instead of damaging the metal or the boarding.
Supplied in Ireland by Commons House Design, the official Dörken DELTA® partner in Ireland, with a showroom in Athy, Co Kildare.
- Dimple height
- approx. 8 mm
- Size
- 50 m x 1.0 m
- Weight
- approx. 210 g/m²
- Material
- Polyamide
Interested in DELTA®-ENKA VENT?
Ask us about the right build-up, quantities, availability and delivery for your project.
Advantages
- Flexible application
Can be used with all DELTA® membranes for boarded roofs.
- Tested fire protection
Tested with DELTA®-FOXX (PLUS) as a roofing system resistant to flying sparks and radiant heat over titanium zinc metal coverings (AbP P-BWU03-I-16.3.243 MPA University of Stuttgart).
- Low frictional resistance
The dense nub structure lets the sheets slide freely when they expand or contract with temperature changes.
Where to Use
Can be laid on the separating layer (hard sheathing) in any direction.
Product Data
- Material
- Polyamide
- Dimple height
- approx. 8 mm
- Deck width
- approx. 1 m
- Weight
- approx. 210 g/m²
- Roll weight
- approx. 10.5 kg
- Roll size
- 50 m x 1.0 m
Values are typical. Check the current Dörken data sheet before specifying.
Frequently Asked Questions
What is DELTA®-ENKA VENT used for?
Can be laid on the separating layer (hard sheathing) in any direction.
What sizes does DELTA®-ENKA VENT come in?
Roll size: 50 m x 1.0 m.
Do you supply DELTA®-ENKA VENT in Ireland?
Yes. Commons House Design is the official Dörken DELTA® partner in Ireland. Contact us for availability, quantities and delivery, or visit our showroom in Athy, Co Kildare.
