DELTA®-FASSADE 50 (PLUS)

Name: DELTA®-FASSADE 50 (PLUS)
Brand: DELTA®

Facade membrane for wide variations of building constructions. Watertight. Extremely tear-resistant. The DELTA FASSADE meets the requirements of the Euro fire class e B-s1, d0. s1, d0.

Diffusion-open, permanent UV-resistant insulation protection membrane with adhesive zones (PLUS) on both edges.

Key advantages

Use as a rain screen behind ventilated cladding with open (or closed) joints in contact with the insulation.
The openwork cladding must not have joints greater than 50 mm and their proportion must not exceed 50% of the total surface.
Gluing of overlaps and side fittings is recommended, in particular for applications behind openwork facades (DELTA®-TAPE FAS).
The longitudinal overlaps are glued using the integrated self-adhesive strips (PLUS version).
Joints ( A ) ≤ 50 mm
Joint proportion ≤ 50% [= A / ( A + B )]
Vertical batten thickness C ≥ 20 mm
Use as a rain screen behind a glazed facade covering.
In the case of a glazed facade cladding, the UV radiation passing through must not exceed 10% of the incident radiation.
The longitudinal overlaps are glued using the integrated self-adhesive strips (PLUS version).

Interested in DELTA®-FASSADE 50 (PLUS)?

Ask us about the right build-up, quantities, availability and delivery for your project.

Enquire about this product Call +353 46 957 0021

Features

DELTA®-FASSADE 50 PLUS / DELTA®-FASSADE 50 is suitable for open facades with up to 50 mm wide joints and a maximum joint proportion of 50% of the surface. The waterproof acrylate coating and permanent UV resistance ensure safe protection from the outside, the Sd value of only approx. 0.02 m ensures vapor permeability from the inside. This guarantees the functional reliability of the structure and permanently dry thermal insulation.

DELTA®-FASSADE 50 PLUS / DELTA®-FASSADE 50 is equally suitable for metal and timber frame constructions.

Intelligent DELTA® technologies for a UV-stable, durable and energetic facade

All DELTA ® -FACADE formwork and underlays are based on intelligent technologies. They are the result of years of experience, continuous development and the highest quality standards. It is our aim to offer the best possible solution for the respective requirement. In the field of façade construction in particular, the requirements today are extremely complex. Intelligent answers are required.

Active- Membrane - System

The intelligent DELTA® membrane technology protects the buildings like a skin. This membrane technology ensures that the entire of construction remains permanently dry. It protects the construction like a second skin.

The cloth layers for our DELTA® sarking sheets are made with the latest BiCo core-mantle technology. Cloth backings ensure the mechanical stability – or tear strength – of all sheets.

Where to Use

Façade membranes for façades with open joints

Product Data

Material: Specially coated, highly tear-resistant polyester fleece with a waterproof plastic coating and adhesive zones on both edges. DELTA®-FASSADE 50 without adhesive zones.
Application: DELTA®-FASSADE 20 PLUS for open facades with up to 50 mm wide joints and a maximum joint proportion of 50% of the surface.
ZVDH: Class UDB-A / USB-A (highest class)
Fire resistance: B-s1, d0 according to EN 13501-2
Tear strength: approx. 370/270 N / 5 cm, EN 12311-,
Water tightness: Class W 1, EN 13859-1 + 2 before and after aging
Sd value: approx. 0,02 m, EN ISO 12572
Diffusion resistance: approx. 0.028 m² hPa/mg
Service Temperature range: -40 °C to +120 °C
Short-term maximum temperature load of the material: +150 °C
Resistance against driving rain: Pass in the driving-rain test for waterproofing and soft sheathing, TU Berlin
Increased requirement for aging: Passed, ZVDH product data sheet table 1
Weight: approx. 270 g/m²
Roll weight: approx. 20 kg
Roll size: 50 m x 1,50 m