DELTA®-GEOTEXX FS 100
Installation accessory for dimpled sheets and drainage membranes on foundation walls.
DELTA®-BEFESTIGUNGSSCHRAUBE: Fixing Screw for Drainage Membranes
A fixing aid for attaching DELTA® protection and drainage membranes, such as DELTA®-TERRAXX, to XPS perimeter insulation boards at least 60 mm thick.
Supplied in Ireland by Commons House Design, the official Dörken DELTA® partner in Ireland, with a showroom in Athy, Co Kildare.
- Pack
- 50 pieces/box
- Material
- Patented plastic screw
Interested in DELTA®-BEFESTIGUNGSSCHRAUBE?
Ask us about the right build-up, quantities, availability and delivery for your project.
Advantages
- Easy and secure fixing
Dimpled and drainage membranes are fixed to the perimeter insulation without piercing the waterproofing. Less waste, and no need for temporary supports.
Where to Use
The perimeter insulation must be firmly bonded to the substrate and/or waterproofing and rest on a stable base. Fix screws along the top edge of the insulation about 50 to 70 cm apart, or across the whole insulated area at roughly 1 screw per m². Push each screw through the drainage membrane and screw it into the insulation board.
At openings such as light wells, set screws at the edges about 50 to 70 cm apart.
Product Data
- Material
- Patented plastic screw
- Requirement
- approx. 1 piece/m² and/or approx. 3 pieces/m
- Tool required
- Screwdriver with TORX 40 bit
- Packaging
- 50 pieces/box
Values are typical. Check the current Dörken data sheet before specifying.
Related Products
DELTA®-MS KNOPF
Knob
Installation accessory for dimpled sheets and drainage membranes on foundation walls.
DELTA®-GEO DRAIN CLIP
Installation accessory for dimpled sheets and drainage membranes on foundation walls.
DELTA®-NOPPENBAHNEN PROFIL
Profile of dimpled sheets
Installation accessory for dimpled sheets and drainage membranes on foundation walls.
Frequently Asked Questions
What is DELTA®-BEFESTIGUNGSSCHRAUBE used for?
The perimeter insulation must be firmly bonded to the substrate and/or waterproofing and rest on a stable base. Fix screws along the top edge of the insulation about 50 to 70 cm apart, or across the whole insulated area at roughly 1 screw per m².
Which accessories work with DELTA®-BEFESTIGUNGSSCHRAUBE?
DELTA®-GEOTEXX FS 100, DELTA®-MS KNOPF, DELTA®-GEO DRAIN CLIP, DELTA®-NOPPENBAHNEN PROFIL, DELTA®-HAFTNAGEL, DELTA®-TERRAXX PROFIL. Ask us and we will put together the full system for your project.
Do you supply DELTA®-BEFESTIGUNGSSCHRAUBE in Ireland?
Yes. Commons House Design is the official Dörken DELTA® partner in Ireland. Contact us for availability, quantities and delivery, or visit our showroom in Athy, Co Kildare.
