DELTA®-GEOTEXX FS 100
Installation accessory for dimpled sheets and drainage membranes on foundation walls.
A fixing aid that lets one person position and hold DELTA®-GEO DRAIN QUATTRO or DELTA®-TERRAXX drainage membranes on foundation walls during installation.
Supplied in Ireland by Commons House Design, the official Dörken DELTA® partner in Ireland, with a showroom in Athy, Co Kildare.
Ask us about the right build-up, quantities, availability and delivery for your project.
A job that used to need two people can be done by one, which also cuts costs.
Set the fixing line from the planned finished ground level. Mark the clip's fixing point about 2 cm above the top edge of the membrane. Fix the clip with washer-head nails, hammer-in plugs (5 mm diameter) or similar.
Loosen the fleece about a hand's width from the dimpled sheet, then slide the membrane behind the clip, which allows easy sideways adjustment. With DELTA®-NOPPENBAHNEN PROFIL, fit the clips in one exact line; the top of the profile then clips in without further fixing. An L-shaped plaster stop bead is recommended at the bottom for the plinth render.
Values are typical. Check the current Dörken data sheet before specifying.
Set the fixing line from the planned finished ground level. Mark the clip's fixing point about 2 cm above the top edge of the membrane.
Size: 126 mm long, 55 mm wide.
DELTA®-GEOTEXX FS 100, DELTA®-BEFESTIGUNGSSCHRAUBE, DELTA®-MS KNOPF, DELTA®-NOPPENBAHNEN PROFIL, DELTA®-HAFTNAGEL, DELTA®-TERRAXX PROFIL. Ask us and we will put together the full system for your project.
Yes. Commons House Design is the official Dörken DELTA® partner in Ireland. Contact us for availability, quantities and delivery, or visit our showroom in Athy, Co Kildare.
Send us your project details and we'll recommend the right DELTA® products.